Author Topic: Data aggregation question  (Read 9089 times)

GAR

  • Full Member
  • ***
  • Posts: 131
  • Karma: +0/-0
Re: Data aggregation question
« Reply #15 on: August 12, 2011, 04:43:45 AM »
110811-2038 EDT

Jerry:

I think I have just now successfully sent plots to your e-mail address. There are 5 and they range from 300,000 to 500,000 bytes.

.

GAR

  • Full Member
  • ***
  • Posts: 131
  • Karma: +0/-0
Re: Data aggregation question
« Reply #16 on: August 28, 2011, 06:28:36 PM »
110828-1016 EDT

In rereading this thread I found a major mistake I made in the post I identified as  110811-0909 EDT

Quote
You install a 3 prong plug on the 120 V leads to the MTU so it can be plugged into the same outlet as the device to be tested. Also connect the display unit to the same outlet. It is important that the black wire of the MTU go to the neutral pin of the plug.

The wrong part is black to neutral. This results from my long time connection with radio and electronics where "black" is the universal color for ground or common. In the power industry white is used for the grounded current carrying conductor and green for the non-current carrying equipment grounding conductor.

So my incorrect statement must be changed to read ---

It is important that the white wire of the MTU goes to the neutral pin of the plug.

,