Author Topic: Maximum Spyders for TED Pro  (Read 2351 times)

klimber

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Maximum Spyders for TED Pro
« on: September 27, 2015, 11:28:50 PM »
Can I put 4 spyders on the pro?  I don't see a place to configure more than two spyders?  it seems like in some places documentation says that 4 will be supported in a future release?

kherr

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: Maximum Spyders for TED Pro
« Reply #1 on: September 27, 2015, 11:37:15 PM »
2 Spyders per MTU. 4 max per ECC

klimber

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Maximum Spyders for TED Pro
« Reply #2 on: September 28, 2015, 03:04:10 AM »
thanks, so if I want to monitor 32 circuits what configuration would I setup?

klimber

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Maximum Spyders for TED Pro
« Reply #3 on: September 28, 2015, 03:07:39 AM »
looks like I get a second MTU and put two new CTs on the power source like the existing ones?

kherr

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: Maximum Spyders for TED Pro
« Reply #4 on: September 28, 2015, 03:14:05 AM »
I would think you would just omit the second set or it would read double. Maybe wait and see if someone else chimes in on that one. Hope you have a lot of room.
« Last Edit: September 28, 2015, 03:18:14 AM by kherr »

klimber

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Maximum Spyders for TED Pro
« Reply #5 on: September 28, 2015, 03:20:25 AM »
ok.

yeah, there is room but it will definitely get busy in the panel.

klimber

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Maximum Spyders for TED Pro
« Reply #6 on: September 29, 2015, 04:40:33 AM »
Called them today and they confirmed what you said.

Buy an MTU and don't use the CTs.

I should have two more spyders and an MTU soon.

hopefully I can make the panel look organized with all the extra wires.  :-)

kherr

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: Maximum Spyders for TED Pro
« Reply #7 on: September 29, 2015, 08:03:14 PM »
Take your time and be sure to document as you go. You'll have a rat's nest after words ....