Author Topic: TED Pro Home vs TED Pro Lite  (Read 2606 times)

kezarjg

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
TED Pro Home vs TED Pro Lite
« on: November 21, 2014, 06:44:14 PM »
Is there a difference between the MTU Lite and MTU Home?

Support7

  • Administrator
  • Sr. Member
  • *****
  • Posts: 472
  • Karma: +1/-0
Re: TED Pro Home vs TED Pro Lite
« Reply #1 on: November 21, 2014, 06:53:25 PM »
Hello kezarjg,

Thank you for the question!


TED Pro Lite is designed for small 3-phase services, or services where there is single-phase service derived from 3-phase power (like a high-rise apartment/condo building). The limitation is 277V / 200A service.

TED Pro Home is a single phase monitoring system that is a direct upgrade to the TED 5000 systems.

I hope this answers your question.


Best Regards,

TED Forum Support

RussellH

  • Sr. Member
  • ****
  • Posts: 356
  • Karma: +0/-0
Re: TED Pro Home vs TED Pro Lite
« Reply #2 on: November 21, 2014, 09:59:26 PM »
3-phase or derived from 3-phase:  208/120V

Single phase: 240/120V or 220/110V.  (The "high" voltage is double the low voltage.)

There's more, but that should be enough to figure out what you have.

kezarjg

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: TED Pro Home vs TED Pro Lite
« Reply #3 on: May 22, 2015, 08:36:29 PM »
Are the MTUs different.  In other words...

If I purchased a TED Pro Home, and would like to now monitor a three-phase system, can I purchase another CT and make it work with the hardware I have.

Thank you

Support 4

  • Newbie
  • *
  • Posts: 12
  • Karma: +0/-0
Re: TED Pro Home vs TED Pro Lite
« Reply #4 on: May 27, 2015, 10:31:03 PM »
Yes the pro Lite MTU will work with any ECC.

You can have the   Pro Lite MTU, and Pro Home MTU on the same ECC, But as separate Net readings.