Author Topic: (Graphing) Day View/History do not show Solar Production.  (Read 2463 times)

Camdoug808

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
(Graphing) Day View/History do not show Solar Production.
« on: November 03, 2014, 09:41:02 AM »
I recently connected 2 new MTU's to my system, 1 for my AC and one for my PV Solar Production. The first issue I found is that my Day Graph does not read negative readings. Please disregard October 31st (I connected my CT's in the wrong direction.) You will notice my hourly view reads MTU3 in the negative, but when I switch to the Day View it does not reflect solar production.

Camdoug808

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: (Graphing) Day View/History do not show Solar Production.
« Reply #1 on: November 03, 2014, 09:43:36 AM »
Hourly View

Camdoug808

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: (Graphing) Day View/History do not show Solar Production.
« Reply #2 on: November 03, 2014, 09:44:38 AM »
History for November 1.

Support7

  • Administrator
  • Sr. Member
  • *****
  • Posts: 472
  • Karma: +1/-0
Re: (Graphing) Day View/History do not show Solar Production.
« Reply #3 on: November 03, 2014, 08:08:38 PM »
Hello Camdoug808,

The range of your graph starts higher than your solar generation would possibly show. Try adjusting the bottom graphing limit, and I expect you'll see your generation show up.

As for your history, I'm a bit confused. What is your meter read date? How long have you had the system installed? The monthly data shows a month lagged. So, for example, if your meter read date is November 1st, the data for November will show in the monthly history on December 1st.

Best Regards,

TED Forum Support
« Last Edit: November 03, 2014, 08:10:52 PM by Support7 »

Camdoug808

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: (Graphing) Day View/History do not show Solar Production.
« Reply #4 on: November 04, 2014, 06:30:28 AM »
It looks like November 1st is an anomaly. November 2 came and went and I now see negative Day data as well as matching History. On to the next problem. Thanks for your great support!