Author Topic: Latest Firmware (Updated 3/1/2018)  (Read 6485 times)

Support7

  • Administrator
  • Sr. Member
  • *****
  • Posts: 467
  • Karma: +1/-0
Latest Firmware (Updated 3/1/2018)
« on: October 07, 2014, 05:33:10 PM »
If you need a Firmware Update, please completely fill out a support ticket at http://www.theenergydetective.com/ticket

Include your current firmware versions, your system type (Pro Home/LITE, Pro Commercial), correct e-mail address, and a brief description of the issue you are trying to correct.

You can check your current firmware by going to Footprints > Help > About. (Firmware version numbers represent the last three digits of the 1.0.696 listed on the "About" page.)

Current Firmware Versions:
ECC: 720
Footprints: 719
MTU Home: 719
MTU Lite: 730
MTU Pro: 718
MTU Pro UI: 710


Firmware Release Info:

Release Date: 2/27/2018
MTU Lite: 730

Release Notes:
Corrects issue with polarity in 3 phase setup.


Release Date: 2/8/2018
MTU Pro: 718

Release Notes:
Corrects min. range validation.

Release Date: 2/6/2018
ECC: 720
Footprints: 719

Release Notes:
ECC:
Fixed issue with tiers in utility setup and Spyder multiplier.

Footprints:
Fixed issue with Port 80 not being able to be adjusted.



Release Date: 12/19/2017
MTU Home/Lite: 719

Release Notes:
MTU Home/Lite: 719
Calibration adjusted for alternate CT's. Only affects MTU's with s/n starting with 17xxxx.

Release Date: 10/26/2017
MTU Home/Lite: 712

Release Notes:
MTU Lite 712 (Home also gets the update but the fix is designed for the Lite so you do not need to update the MTU with your TED Pro Home system unless you would like to.)
Corrections to Power Factor measurement in a three phase environment.



Release Date: 10/03/2017
ECC: 717
Footprints: 717
MTU Pro: 711
MTU Pro UI: 710
MTU Home/Lite: 707

Release Notes:
ECC/Footprints 717
Bug fix: Utility Settings not saving in Chrome.
TCP only option and MTU default settings added.
Spyder Zero Cal troubleshooting feature added.
Disable SSL
Fixed half time zone issue so now it recognizes time zones with a .05 interval.

MTU Pro 710/UI 711
MTU TCP only option
Disable reboot option (for MTUs posting directly to Commander)
Disable SSL
Changes in Spyder Zero Point Cal

MTU Home/Lite 707
Changes in Spyder Zero Point Cal



Release Date: 2/25/2016
ECC version .696
Footprints version .700
MTU Pro version .700
MTU Pro UI .626
MTU Home/Lite .692

Release Notes:
Changes in validating PLC packet recognition and minor bug fixes to ECC, Footprints, and MTU Pro.


Release Date: 11/17/2015
ECC version .687
Footprints version .692
MTU Pro version .692
MTU Pro UI .626
MTU Home/Lite .692

Release Notes:
MTU and ECC FW: New minimum thresholds for Spyder inputs: 25W for 20A CTs, 200W for 60A and 200A CTs
Footprints: Removed weather widget and replaced with Spyder readings.

« Last Edit: March 01, 2018, 03:42:08 PM by Support7 »