Author Topic: House Code help  (Read 3110 times)

Jnapoli

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
House Code help
« on: May 17, 2017, 11:40:29 PM »
My original 1001 RDU fell off the counter (with help from a playful feline), I purchase a new display unit but can't get it to communicate with the existing MDU. The MDU is labeled model 5000, but the six digit serial number has a sticker over top it with a nine digit number. The serial number is 118111876, my problem is I can't figure out the house code.

pfletch101

  • Sr. Member
  • ****
  • Posts: 424
  • Karma: +0/-0
    • My home page
Re: House Code help
« Reply #1 on: May 18, 2017, 04:14:40 PM »
You will almost certainly get a useful response faster if you raise a Support ticket on the main site.
Peter R. Fletcher
TED Pro Home - main MTUs monitoring utility and PV Solar feeds; 2 Spyders monitoring selected individual circuits

Support7

  • Administrator
  • Sr. Member
  • *****
  • Posts: 472
  • Karma: +1/-0
Re: House Code help
« Reply #2 on: May 19, 2017, 08:08:40 AM »
Unfortunately we no longer support the TED1001 so access to the documentation is a little scarce but I was able to find out a little information on the house code.
Each MTU has a House Code from 000 to 255. This number can be found in two places: on a sticker on the MTU, and on a sticker included loose with the MTU.
The House Code is the three-digit number preceding the Serial Number. For example; If the number on the sticker is 137B-15509741 then the house code is 137.

TED Support
www.theenergydetective.com