The Energy Detective Forums

General Category => TED Pro Support => Topic started by: eaglemanbsa on April 26, 2014, 05:53:53 AM

Title: Hardware trouble from the get-go
Post by: eaglemanbsa on April 26, 2014, 05:53:53 AM
I have a 200 amp breaker, and the CTs that came with my ted pro home are nowhere near big enough to go around the incoming hot lines. I measured 0.720" with calipers as the OD of the lines, and the ID of the CTs appears to be roughly 0.65". What now? Did I just purchase a $300 paperweight?  >:(
Title: Re: Hardware trouble from the get-go
Post by: pfletch101 on April 26, 2014, 07:06:21 AM
I believe that there is an alternate current sensor setup that will wrap around conductors of arbitrary size. Give the TED support folks a call on Monday.
Title: Re: Hardware trouble from the get-go
Post by: eaglemanbsa on April 26, 2014, 02:08:58 PM
Got a reply from tech support on the ticket, they evidently have larger CTs that will work, will just cost an extra $13 and some time to ship stuff back and forth.