Author Topic: 1001 MTU with broken plug  (Read 3009 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
1001 MTU with broken plug
« on: July 28, 2011, 08:30:03 AM »
 During a move the male half of the four wire plug on my 1001 MTU was broken. I need your help to figure out the correct orientation from what is left. What is left of the male half is the side with the slot for the key on the female half. The problem is the key was broken off also. The strongest clue is the the tapered groove on both halves. What is the position of this groove when the plug is connected correctly?


  • Sr. Member
  • ****
  • Posts: 291
  • Karma: +0/-0
Re: 1001 MTU with broken plug
« Reply #1 on: July 28, 2011, 10:16:34 PM »
Can you post a picture of the plug? My concern is that it won't function properly if it's missing half of it's plug.