« previous next »
Pages: [1]

Author Topic: Stuck at 0.686 after power outage?  (Read 2122 times)

Kevin

  • Newbie
  • *
  • Posts: 24
  • Karma: +0/-0
Stuck at 0.686 after power outage?
« on: May 21, 2018, 07:40:24 PM »
We had a 10-minute power outage today (utility says it was line maintenance), and now TED Pro Home is showing a constant 0.686 for the main feed, even though the Spyder shows +1.3Kw in use.

I tried the "Restart TED Pro" option from the Web, and no change.   Will it help to go onsite and power cycle the Measuring Transmitting Unit (MTU)?
Logged
Gateway Version 1.0.499, Daughterboard Version 1.0.0, Footprints Version 1.0.281, MTU Version 1.0.61

Kevin

  • Newbie
  • *
  • Posts: 24
  • Karma: +0/-0
Re: Stuck at 0.686 after power outage?
« Reply #1 on: May 21, 2018, 08:42:53 PM »
 ;D  Hard power cycle on the MTU fixed it. 
Logged
Gateway Version 1.0.499, Daughterboard Version 1.0.0, Footprints Version 1.0.281, MTU Version 1.0.61
Pages: [1]
« previous next »