Author Topic: Stopped receiving data  (Read 1941 times)

Swede2

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • Swede's Dock
Stopped receiving data
« on: July 27, 2016, 08:03:31 PM »
 5000-C,   3 yro system, working flawlessly.
Gateway  1.0.499
Daughter 1.0.494
Footprint 1.0.281
MTU 1.0.0


Week or so ago, only showed 60 volts. Think might have had a lightning incident.

Gateway lights show steady green on top right, flashing yellow on top left, steady green top front.

No lights on the CT clams (dunno if supposed to be)

MTU lights? (panel cover back on, can't remove alone - old, handicapped. only one arm working, brain damaged, yadayada... IOW useless physically. {sigh})

Do I need new clamps, new MTU or both?

Thanks,

Swede

It's a pretty day
I hope you enjoy it.
Swede
http://www.SwedesDock.com/LDN [/enter]

Swede2

  • Newbie
  • *
  • Posts: 16
  • Karma: +0/-0
    • Swede's Dock
Re: Stopped receiving data
« Reply #1 on: August 21, 2016, 09:05:58 AM »
Found the problem. Somehow something changed in my system causing the MTU to become erratic.

Long story short, my son's visiting friend (a FIOS installer) looked at it, the installation & trouble shooting videos, spoke with TED trouble shooters (they speak the same "language") and ended up putting in a completely separate independent circuit with its own breaker for the Gateway.

All is well in TED land again.

Thx for "listening."
« Last Edit: August 21, 2016, 09:10:02 AM by Swede2 »
It's a pretty day
I hope you enjoy it.
Swede
http://www.SwedesDock.com/LDN [/enter]