Author Topic: 4-panel dual-fuel configuration/compatibility  (Read 1543 times)

thenline

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
4-panel dual-fuel configuration/compatibility
« on: July 22, 2013, 12:00:49 AM »
Hello, and thanks so very much in advance for your time and help.

We're in the processes of building a new home and shop, and before purchasing a TED 5000 C system (with three additional MTU's), wanted to confirm functionality.  

Each building will have two service panels inside; one for standard service, with the other for dual-fuel service (to run geothermal HVAC, hot water heater, etc).  Power from the electric utility will be run to the property into a dual-pedestal.  There will be two meters in the pedestal; one for the standard service and one for the dual-fuel service.  The standard rate meter will have a feeder going to the house, and another feeder going to the shop.  The dual-fuel rate meter will also have a feeder going to the house, and another feeder going to the shop.

So, my question is, will I be able to monitor each of the 4 panels with one system?

Thanks again so much!